A tension rod lets you dress an RV doorway with seasonal garland without drilling into the trim, and you can remove the display when you need the passage clear. Choose a rod that fits the opening and a lightweight garland that leaves enough headroom for people to pass.

A decorated doorway with a greenery garland hanging from a tension rod.

In an RV, every inch of clearance counts. Set the rod high, check that it sits securely against the side walls, and keep decorations clear of doors, curtains, and overhead cabinets. Before you travel, take the display down and stow the rod and garland safely.

1) Classic Faux-Pine Arch on an Adjustable Shower Rod

A pine garland arches over a doorway on an adjustable rod.

A classic faux-pine arch gives your RV doorway a full holiday look with a simple adjustable shower rod. Measure the opening first, then extend the rod until it presses firmly against both sides without bowing the trim. Drape the garland over the center and shape the greenery into a gentle curve.

Use small reusable ties to attach the garland to the rod at several points. This keeps the arch from sliding when you brush past it. If the pine looks too dense for a tight passage, spread the branches apart so more of the doorway stays visible. Keep the ends short and tucked close to the rod, and remove the garland before driving so it cannot swing or snag.

2) Low-Profile Cedar Garland for a Narrow RV Passage

A narrow RV doorway decorated with a cedar garland attached to a tension rod.

A slim cedar garland adds greenery while keeping a narrow RV passage open. Choose a flat, lightweight strand, then place the tension rod close to the top of the doorway. Attach the garland with ties spaced along its length so it stays snug instead of hanging in a deep curve.

Let the cedar follow the rod with only a shallow dip at the center. This shape helps preserve headroom and keeps branches from brushing shoulders as you walk through. If the doorway has a curtain, test its full movement before finishing the arrangement. Trim or fold in any long sprigs that reach into the walking space, and check that the rod ends sit against solid trim or wall surfaces.

3) Battery-Powered Micro-Light Garland for a Cozy Glow

A warm-lit garland hangs across a doorway on a tension rod.

A battery-powered micro-light garland gives your RV doorway a soft evening glow without a cord crossing the floor. Weave a short string of warm-white lights through lightweight greenery, keeping the battery pack near one end of the tension rod. Secure the pack with a reusable tie so it stays in place and remains easy to reach.

Tuck the wire into the branches as you work, then switch the lights on to spot loose loops or glare. Keep the pack away from a moving door and leave the controls accessible. For a tidy finish, let the garland hang in a shallow curve that preserves headroom. Turn the lights off when you leave the RV, and remove the full display before travel.

Would You Like To Save This Article?
Enter your email and we'll send you the link so you can come back to it later.

4) Shatterproof Ornaments and Pinecones on a Lightweight Garland

An evergreen garland decorated with ornaments and pinecones spans a doorway.

Lightweight shatterproof ornaments and small pinecones add texture to an evergreen garland without loading the rod with heavy decor. Start with a narrow strand of faux pine, then attach each ornament with a short piece of ribbon or a soft tie. Space the accents along the greenery so the doorway looks balanced from either side.

Use plastic or other shatter-resistant ornaments for a moving RV interior, and skip bulky pieces that could strike the trim. Keep pinecones firmly attached, with their points turned toward the garland. Once the rod is set, gently check each tie and make sure the decorations hang clear of faces and shoulders. A few well-spaced accents keep the display light and easy to pass beneath.

5) Velvet Ribbon and Eucalyptus for an Asymmetrical Swag

A eucalyptus and velvet ribbon swag hangs asymmetrically across a doorway.

An asymmetrical eucalyptus swag gives your RV doorway a relaxed look with one longer draped side. Attach a light eucalyptus strand to the rod, then gather more greenery toward one end so the swag slopes gently across the opening. Keep the longer section close to the side trim, where it stays out of the main walking path.

Tie a velvet ribbon around the fuller end or weave a short length through the leaves. Choose a narrow ribbon that will not drag against a door or catch on a passing bag. Secure the greenery at several points to keep its shape, then stand back and check the view from both sides. If the swag dips too low, shorten the drop before you tighten the rod.

6) Pine Garland with Mini Stockings for a Bunkroom Doorway

Pine garland with small stockings hangs across a bunkroom doorway.

Mini stockings turn a pine garland into a cheerful accent for an RV bunkroom doorway. Pick lightweight fabric stockings, then hang them from the greenery with short ribbon loops. Space them so they sit above the doorway opening and do not brush anyone passing through.

Keep the stockings empty while the RV is moving, and take them down before travel. Small decorations can swing or fall when a vehicle shifts, so secure the garland firmly to the rod and check each loop by hand. For a neat display, let the pine form a shallow arch and hang the stockings at a consistent height. If the doorway leads to a bunk, keep the ends clear of bedding and any nearby curtain track.

7) Bead-and-Berry Garland for a Simple Farmhouse Look

A wooden bead and berry garland hangs across a doorway.

A bead-and-berry garland brings a simple farmhouse feel to your RV doorway with a lighter, less leafy profile. Choose a strand with small wooden beads and compact faux berries, then drape it across the rod in a shallow curve. Attach it at a few points with clear ties so the beads stay evenly spaced.

Check the strand’s weight before hanging it, especially if the rod is extended close to its maximum width. Keep berry clusters away from the passage edge, where clothing or bags could catch them. You can add a short ribbon at one side for a bit of color, then leave the rest of the doorway uncluttered. Remove the garland and stow it securely before driving.